China Made in China 30mm Shaft Collar Clamp axle collar bearing

Solution Description

       Jingbang manufactures shaft collars in several types to in shape shafts ranging from 1/8″ to 6″ and 3mm to 150mm. They are created from select qualified bar stock in 303 & 316 stainless steel, black oxide and zinc plated carbon metal, substantial-strength aluminum, and engineered plastic. Our shaft collars have specifically controlled confront to bore perpendicularity (recognized by the grooved encounter) TIR ≤ .002″ (.05mm) with tighter tolerances on bearing locknuts. Perpendicularity is vital for alignment when a shaft collar is utilised as a load-bearing experience, mechanical stop, or for mounting factors. And we can also engrave the Emblem according to consumer needs

 

Product Name Shaft Collar Clamp
Dimension one/8″ to 6″ and 3mm to 150mm. or non-standard according to your requirements.
Settle for Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2571, Brass/Bronze, Titanium etc.

Accept 

Complete

Machining, Simple, Sharpening, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, and so forth, as per your requirements.
Sort One particular-piece, Two-piece, Threaded, Shaft coupling, Large-obligation, Mountable, Swift Clamping, Hex& D- Bore, Established screw
Standard Metric, imperial
Packing Service We usually packing fasteners to prevent them from colliding with every other for the duration of transportation to produce scratches and floor plating, also acknowledge customization.
Sample Services Totally free samples will be sent to you after confirming the order, and we will demand a sample charge for some goods with high benefit.

We have stock of the adhering to products, please get in touch with us for the value!
  One-PIECE: Carbon metal and black oxide

 

Bore measurement:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-Pieces: Carbon metal and black oxide

Bore measurement:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  Set-SCREW: Carbon metal and black oxide

Bore dimension:

 

8mm,10mm,13mm

Personalized Types

As a service to our buyers, we offer you our vast manufacturing encounter and abilities to satisfy special needs with custom parts. Our in-residence engineering group has in depth knowledge creating and personalized engineering options to meet your demands. If you do not see what you are searching for in our common line, please inquire about personalized options.

 

Resources & Finishs

 

Related catalog

  • We also supply other products click here

        Washers          Stamping

Packaging & Shipping and delivery

We can also buy and full packaging in accordance to buyer demands, such as blister bins, rustproof paper, pearl cotton packaging, and we promise not to make a penny on extra packaging.

Production Process

 

Our Benefits

Organization Profile

FAQ

one, How to guarantee split Shaft Collar Clamp every process’s high quality?
Shaft Collar Clamp Each and every process will be checked by our top quality inspection department which insures each product’s good quality. In the creation of goods, we will personally go to the manufacturing unit to check the top quality of shaft collar.
two, Shaft Collar Clamp delivery time?
For Shaft Collar Clamp we have stock, inside of fifteen times If tailored, in accordance to your quantity, about twenty-25days.
three, What is your payment method?
Paypal, Alibaba, 30% benefit of T/T in advance and other 70% balance just before transport. For little get considerably less than1000USD, would suggest you pay a hundred% in progress to minimize the bank charges.
4, Can you provide Shaft Collar Clamp sample?
Positive, for stocked Shaft Collar Clamp, we will offer free of charge Shaft Collar Clamp samples and you will be billed for shipping and delivery. 

Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard: DIN, ANSI, GB, JIS, BSW
Material: Carbon Steel, Stainless Steel,Al6061
Connection: Standard or Customized

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|

Order Sample

On request

###

Customization:
Available

|


###

Product Name Shaft Collar Clamp
Size 1/8" to 6" and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2024, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

###

We have stock of the following products, please contact us for the price!
  ONE-PIECE: Carbon steel and black oxide

 

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-PIECES: Carbon steel and black oxide

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  SET-SCREW: Carbon steel and black oxide

Bore size:

 

8mm,10mm,13mm

###

1, How to ensure split Shaft Collar Clamp every process’s quality?
Shaft Collar Clamp Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of shaft collar.
2, Shaft Collar Clamp delivery time?
For Shaft Collar Clamp we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide Shaft Collar Clamp sample?
Sure, for stocked Shaft Collar Clamp, we will provide free Shaft Collar Clamp samples and you will be charged for shipping. 
Shipping Cost:

Estimated freight per unit.



To be negotiated

###

Standard: DIN, ANSI, GB, JIS, BSW
Material: Carbon Steel, Stainless Steel,Al6061
Connection: Standard or Customized

###

Samples:
US$ 2/Piece
1 Piece(Min.Order)

|

Order Sample

On request

###

Customization:
Available

|


###

Product Name Shaft Collar Clamp
Size 1/8" to 6" and 3mm to 150mm. or non-standard according to your requirements.
Accept Material AISI 303/304/316L, SUS 303/304/316, Aluminum 6061/6063/7075/2024, Brass/Bronze, Titanium etc.

Accept 

Finish

Machining, Plain, Polishing, Zinc- Plated, Black Oxide, Anodizing, Passivation, Galvanized nickel-alloy plated, Powder Coating, etc, as per your requirements.
Type One-piece, Two-piece, Threaded, Shaft coupling, Heavy-duty, Mountable, Quick Clamping, Hex& D- Bore, Set screw
Standard Metric, imperial
Packing Service We generally packing fasteners to prevent them from colliding with each other during transportation to produce scratches and surface plating, also accept customization.
Sample Service Free samples will be sent to you after confirming the order, and we will charge a sample fee for some products with high value.

###

We have stock of the following products, please contact us for the price!
  ONE-PIECE: Carbon steel and black oxide

 

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  TWO-PIECES: Carbon steel and black oxide

Bore size:

6mm,8mm,12mm,15mm,

16mm,18mm,20mm,22mm,25mm,

30mm,35mm,40mm,50mm,60mm,

70mm,75mm,80mm.

  SET-SCREW: Carbon steel and black oxide

Bore size:

 

8mm,10mm,13mm

###

1, How to ensure split Shaft Collar Clamp every process’s quality?
Shaft Collar Clamp Every process will be checked by our quality inspection department which insures every product’s quality. In the production of products, we will personally go to the factory to check the quality of shaft collar.
2, Shaft Collar Clamp delivery time?
For Shaft Collar Clamp we have stock, within 15 days; If customized, according to your quantity, about 20-25days.
3, What is your payment method?
Paypal, Alibaba, 30% value of T/T in advance and other 70% balance before shipping. For small order less than1000USD, would suggest you pay 100% in advance to reduce the bank charges.
4, Can you provide Shaft Collar Clamp sample?
Sure, for stocked Shaft Collar Clamp, we will provide free Shaft Collar Clamp samples and you will be charged for shipping. 

Shaft Collar

A shaft collar is a common machine component that provides mechanical support to shafts. It is found in motors and gearboxes and serves several important functions. Its design makes it an easy component to install. In addition to providing mechanical support to shafts, shaft collars can also serve as locating components and bearing faces.
Shaft Collar

Sizes

Shaft collars are complex components with several factors that determine their performance. Typical considerations include the style, materials used, bore size, and shaft geometry. Manufacturers typically have information on these factors on their websites. Users can also contact them for advice. These components are available in different sizes and types.
Shaft collars are available in a wide range of sizes, from 1/8 inch to six inches. They can also be re-bored if necessary. There are two main types of shaft collars. The basic one uses set screws, which may mar the shaft. The other type features a clamp screw and a hinge on one side. This eliminates the risk of losing screws.
The most common types of shaft collars are made from steel or aluminum. Plastic shaft collars are lightweight and inexpensive, but have reduced holding power. Steel shaft collars are more durable and hold their shape without bending. They also tend to be corrosion resistant. The steel grades used can have a big impact on their performance. For example, the 12L14 alloy is easier to machine, but does not do well in welding applications. Stainless steel shaft collars offer enhanced corrosion resistance, but reduced holding power. They are most commonly made from 304 stainless steel.
Shaft collars are an integral part of many mechanical systems. They are used to mount shafts onto flat surfaces and hold mechanical components in place. These accessories are available in a wide range of sizes and styles. Depending on the application, a shaft collar can be made to fit virtually any shaft.
The material used for shaft collars is also an important factor. The material of the shaft collar can make a big difference in the performance of the collar. The screw can be either flat or hex. The material will also determine the holding power. A screw with a hardened center will provide better holding power.
Another factor affecting the holding power of shaft collars is its surface treatment. The most common types are steel, black oxide, and zinc-plated. The latter is beneficial as it reduces the friction coefficient and enhances the holding power. Zinc-plated collars are better corrosion resistant than black oxide. However, the black oxide treatment is more effective because it prevents slippage.

Construction

Shaft collar construction involves the construction of a collar around an underground shaft. This structure consists of steel casing and concrete that extends below the surface of the ground. The concrete may be constructed using conventional or specialty cements. It may also contain accelerators and other additives to improve its holding strength. The concrete may also contain heavyweight or lightweight aggregates for optimal properties.
There are two main types of shaft collars. The double split collar is the most common type. It has a split design in the middle and is fastened using two allen head cap screws on each side. It has greater holding power than a solid collar, and the two-piece design makes it easier to install and replace. In addition, double split collars don’t require disassembling the entire shaft and its components.
There are many factors to consider when selecting a shaft collar. The material, holding power, and surface treatment of the shaft collar will affect its ability to withstand the load without slipping. These factors must match the specifications of the application in order to maximize its safety. A guide can help you choose the most appropriate shaft collar for your needs. The holding power of a shaft collar depends on the material used for construction and the screw size.
Shaft collars are used for a variety of applications that require a secure grip on mechanical components. They can be used on shafts, tubes, piping, and even flat surfaces. Only the highest quality collars are approved for use in industrial settings. These collars help ensure proper alignment of mechanical components and prevent any unnecessary movement. There are three different types of shaft collars. One type is a two-piece collar that is held together by two socket head screws.
Shaft collars may include an extended concrete pad at the surface. This concrete pad can support surface equipment and piping support assemblies. The shaft collar extends below temporary bracing material and within the retainment wall. The extended portion of the collar is then extended into the competent rock. From there, the collar transitions to a shaft lining assembly.
Shaft Collar

Functions

A shaft collar is a simple device that plays a critical role in a wide variety of industrial applications. Its primary functions are to hold components in place, locate components on the shaft, and form an attachment between a shaft and another component. In designing a shaft collar, a designer needs to consider several factors, including the material, bore size, and geometry of the shaft. It is also important to consider the specific requirements of the system.
Threaded collars are superior to smooth-bore collars in many ways. Threaded collars are more resistant to axial loads than smooth-bore collars, which rely on friction. Because the collar and shaft are threaded, they are practically impossible to move axially without breaking the shaft.
There are many types of shaft collars, each with their own unique properties. Each collar has different applications, and its performance must match the needs of the application. For many applications, holding power is paramount, while other performance factors include weldability, inertia, conductivity, corrosion resistance, and precision of collar-face relative to the bore.
While shaft collars may exert some holding force, they also exert other forces on the shaft. For example, they are ideal for splitting hubs, where they act as interfaces between various components. In addition, their close tolerances allow them to exert minimal force on the hub. This allows them to provide increased holding power while minimizing the force needed to close the hub.
Despite their simplicity, the shaft collar plays a crucial role in machine design. They hold components in place and provide necessary positioning for power transmission. Additionally, they are used as spacers in motor assemblies. And, they can also act as mechanical stops, limiting the movement of the shaft. You can find them in virtually any type of machinery.
Another type of shaft collar is the threaded collar, which can be axially or radially attached to the shaft. Its design has an internal thread that helps to precisely position it along the shaft. Internal threads also offer enhanced support for high axial loads. Internal threads also act as a positive mechanical stop.

Applications

Shaft collars are used in a variety of industrial applications. They serve as accurate stops and easy-to-adjust spacers. They can be used on glass, thin-wall tubing, and plastic. Other applications include optical measuring instruments and positioning systems for MRI machines. These collars are available in different sizes, materials, and styles.
The material used for shaft collars can have a significant impact on their performance. A collar’s holding power is also affected by the strength of its screw. Generally, a collar manufacturer will provide a screw that is compatible with the application. However, in some cases, it is necessary to use a nonstandard screw.
The clamp-style collar is reliable under constant loads, but it may need extra support when shock loads are present. In these situations, a small mass is impacted, and high forces are created. A positive stop can help a clamp-style collar stay in place during such shock loads. Alternatively, a collar undercut on a shaft can provide positive stops in both axial directions.
There are many different shaft collar designs and styles. Choose the right one for your application by considering your specifications. Different styles have different purposes, so consider the type and material that is right for your application. Some manufacturers offer a variety of different styles to choose from. You can visit their website or call their customer service representatives for assistance. This way, you can choose the best shaft collar for your specific needs. These collars are a very important part of many mechanical systems.
Clamp-style collars are an excellent choice when axial adjustment along the shaft is required frequently. These collars are easy to install and remove and do not mar the shaft. In addition, they provide excellent clamping force and impressive holding power. Quick-clamp collars are also a great choice for light-duty applications. They allow for fast and easy adjustment and are particularly useful in packaging and printing industries.
Shaft collars are composed of two components: a central bore and a second component. The first component is preferably made of resilient elastomeric material. The second component is made of a plastic material and has a relative stiffness that helps the shaft collar slide on a shaft without causing too much stress.
China Made in China 30mm Shaft Collar Clamp     axle collar bearingChina Made in China 30mm Shaft Collar Clamp     axle collar bearing
editor by CX 2023-04-03