China Factory Jw High Torque Oil Drilling Tools Downhole Motor for Drill Collar with high quality

Merchandise Description

factory JW large torque oil drilling instruments downhole motor for drill collar

one.Product description
Specification of downhole motor

Downhole motor is a variety of downhole dynamic drilling resource CZPT the electrical power of drilling mud. Mud stream from the outlet of mud pump flows via a by-move valve into the motor. This stream produces stress loss at equally inlet and outlet of the pump, to press the rotor into rotating, and to transmit the torque and speed CZPT the little bit. The downhole motor residence mostly is dependent CZPT its home parameters.
Positive aspects OF DOWNHOLE MOTOR
Elevated rate of penetration.
Far better hole deviation manage.
Reduction in drill string failure fee.
Reduction in use and tear of the swivel, Kelly, and rotary drives.
Reduction in gasoline cost, given that compared to rotary drilling, less power is required to electrical power a downhole motor.

2.Pictures of downhole motor 


three.Application of downhole motor 
A Assortment of Sorts & the Capabilities In accordance with the genuine drilling demands,we push out higher,
midiem and lower speed  downhole motors,of a range of varieties with various useful configuration and application for all working situations.
1.Standard type Standard motor,mud lubricating transmission shaft, straight, single and double bent.
two.Lengthy type The torque is enhanced by 30%to 60%than common ones, mud lubricating transmission shaft, straight, solitary and double bent.
three.High flow fee type The adoption of hollow rotor and different dimensions of challenging alloy jet nozzle to improve the incoming movement and little bit electricity.

4.Our service 
Supply Time: Dependent on order amount, usually it will take 30 days for generation.Only 2 or 3 days if we
have inventory on your request dimension.
High quality Handle: We have our specialist QC and all the goods will be rigorous inspection and tests for every get just before shipping out. 
Right after Companies: Complex Assistance will be available in any time. We could provide the specialist suggestion for you.
EX: 1.Decide on the right most ideal products.
       2. According to the rock sorts, choosing the encounter kind, button tooth type.
       3. In accordance to the various goal,. choosing the various entire body type 

five.Firm introduction
We are HangZhou JW Petroleum Equipment Co.,Ltd.specializes in downhole motor,drill bits,drill pipe,crossover sub,fishing resources for water well,oil field,development,geothermal,directional boring,Including three series 
with full model types,as follows:
Drilling Bit series: rock roller bit,tricone bit,pdc drill bit,single bit,cone bit and hole opener 
Drilling Equipment Parts series: downhole motor,manual tong,elevator,slips,stabilizer
Workover Fishing Tool series: releasing spear,junk basket, overshot,reversing sub,die collar, 
fishing tap etc.
With in excess of ten a long time experiences,our mission at JW is to keep at the best in solution integrity and clients fulfillment around the world. We hope you take into account us for your foreseeable future demands.
With specialist producing technology and trustworthy management, JW folks will generate brilliant long term with new and old buyers collectively.

To Be Negotiated 1 Piece
(Min. Order)

###

Certification: ISO 9001:2000
Standard: API
Surface Treatment: Spray-Paint
Manufacturing Process: Casting
Material: Carbon Steel
Bit Size: 120mm
To Be Negotiated 1 Piece
(Min. Order)

###

Certification: ISO 9001:2000
Standard: API
Surface Treatment: Spray-Paint
Manufacturing Process: Casting
Material: Carbon Steel
Bit Size: 120mm

Types of Shaft Collars

A shaft collar is a simple machine component that is an integral part of many power transmission applications. It is most commonly found in motors and gearboxes and serves as a mechanical stop, locating component, and bearing face. Its easy installation and quick assembly make it an ideal component for a variety of applications.
Shaft Collar

Clamp-style shaft collars

Clamp-style shaft collars are fasteners that fit over shafts. They can be made of aluminum, steel, or titanium. Stainless steel collars are available in corrosion-resistant finishes to prevent galling. Engineered plastics are also available. Black oxide finishes improve corrosion resistance and provide a smooth surface for screw installation.
The holding power of Clamp-style shaft collars depends on the shaft’s bore size and concentricity, which are important factors in many applications. The fastening hardware is also important, as it can affect torque transmission. For example, forged screws are superior to broached screws in a number of ways, including reduced risk of reaming out. In addition, the material of the collar must be strong enough to withstand the torque required by the screw.
Shaft collars are complicated components. Their performance can determine the efficiency of an application. The design process is complex, and many factors are considered. Considerations include shaft geometry, bore size, and style. Shaft collar manufacturers will provide performance information on their website. If you are not satisfied with the information provided, you can contact the manufacturer.
Clamp-style shaft collars are made from high-quality materials. The metal used to produce them is lead-free and stainless, which resist corrosion. Moreover, these shaft collars have a high holding power, so they won’t mar your shaft and ensure proper alignment. These collars can be found in a variety of bore sizes, from 1/8″ to six inches.
Clamp-style shaft collars are available in lead-free steel, 303 and 316 stainless steel, and aluminum. They are available in a one-piece clamp or a two-piece clamp style. They are made of high-grade steel and are machined to a burr-free surface.
Clamp-style shaft collars have two-piece clamps that can be easily disassembled and installed in their proper position. Two-piece clamps are stronger than one-piece collars because all of the clamping force goes directly into the clamping shaft. Two-screw clamps have two and four-screws, and can also be wrench-tightened.
Set screw collars were one of the first shaft collars to be mass-produced. They were often used on line shafting in early manufacturing mills. While they can work well for simple shaft positioning, they’re not the most reliable option for complicated applications. Furthermore, set screws can cause damage to the shaft, making it difficult to reposition the collar or adjust its angle. For this reason, small flats are usually added to the shaft at set screw locations.
Shaft Collar

Set-screw shaft collars

Set-screw shaft collars are used to secure a shaft to a screw. They are available in several sizes and materials. Typical types include the solid, quick-release, split, and threaded styles. They come in an assortment of sizes and materials, including aluminum, zinc plated steel, and black oxide steel. Most are available in stock and are available in various sizes.
These collars come in many sizes and are ideal for use with standard round shafts. They are easy to install and disassemble and feature a high clamping power. They are also available in custom designs and materials. Set-screw shaft collars are available for use in various industries.
The company manufactures a variety of collars, including steel, zinc plated steel, and stainless steel. They also offer custom and adjustable collars. These collars are used in a variety of industries, including the food, chemical, pulp and paper, and wood industries. They are available with a variety of screw threads.
The screw and shaft material relationship must be compatible to ensure a secure fit. In addition, the shaft material should be softer than the screw material. For this reason, set-screw shaft collars are most effective when the shaft is made from softer material. Some setscrew shaft collars feature forged socket set screws to increase their holding power and torque capacity. Additionally, forged stainless steel set screws also increase their performance and hardness.
Shaft collars can be used on machines and transmission applications. They can be adjusted with a set screw or grub screw. In addition to setting the collar into place, a screw driver can also be used to adjust the grip on the collar. This type of shaft collar is often used in manufacturing applications.
Clamp-type collars are another type of shaft collars. These types allow the shaft to rotate and are used for mounting sensors and fixtures. These collars can be found in one-piece or two-piece styles. They can also be used in harsh environments.
Shaft Collar

Single split shaft collars

Single split shaft collars are used in many applications to protect the shaft from wear and tear. They are easy to install and disassemble, reducing downtime and labor costs. These collars utilize full seating torque of the set screws to apply equal force distribution around the shaft’s circumference, providing stronger holding power.
These shaft collars are available in a variety of materials. They are typically made from different types of steel, including stainless, alloyed steel, nylon, and aluminum. Some are even available in custom sizes. In addition to standard sizes, single split shaft collars also come in a variety of finishes, including black oxide and chrome.
Single split shaft collars come in metric and imperial sizes. They can be made of various materials, including zinc and lead-free steel. These collars are available with a black oxide finish for extra corrosion resistance. They are also available in 303 and 316 stainless steel. They can also be made from engineered plastics.
Single split shaft collars are the most popular style of shaft collars. They are easy to install and disassemble. They provide a tight fit and superior holding power over solid shaft collars. They are also easier to replace and can be used on a variety of shafts. In addition, single split shaft collars are easy to remove and adjust.
Single split shaft collars are available in a variety of bore sizes. They can fit shaft diameters from 1/8″ to four fifteen/16″. Ideally, the material used should be softer than the set screw. You can also choose between non-plated and chrome-plated collars. These collars are available in metric or imperial measurements.
Single split shaft collars are one-piece or two-piece designs. Single-piece shaft collars feature one screw and two-piece collars have two. They are easier to install than single-piece shaft collars and are suitable for lighter duty applications. Single split shaft collars are available in a variety of threaded bore sizes.
Single split shaft collars have a wide range of uses in industrial settings. They can secure bearings on shafts or locate components in motor assemblies. They can also function as mechanical stops. RS PRO offers a wide selection of shaft collars that meet and exceed industry standards.
China Factory Jw High Torque Oil Drilling Tools Downhole Motor for Drill Collar     with high quality China Factory Jw High Torque Oil Drilling Tools Downhole Motor for Drill Collar     with high quality
editor by CX 2023-03-31